SPRAY FOAM
INJECTION FOAM
BIOVENT
EQUIPMENT

Biofoam 800

Biofoam 800 is a open cell breathable soft spray foam insulation. It is designed specifically for use in domestic structures. It has the highest bio-renewable contents of any other spray foam on the market today.

Attic Conversion

Application areas:

Technical Specifications.:
Characteristics Test method reference Biofoam 800
800 Units
Water absorption IS EN 1609:1997 (Method A) 1.19 Kg/m2
Water vapour permeability I.S. EN 12086:1997 Water
Vapour transmission rate (g)
31042 Mg/m2/Hour
I.S. EN 12086:1997
Water Vapour Permeance (W)
13.0

Mg/m2hourPa
I.S. EN 12086:1997
Water vapour resistance (Z)
0.08 m2HourPa/
mg
I.S. EN 12086:1997 Water
Vapour resistance factor (µ)
2.03 µ -value
Thermal Conductivity I.S. EN 12667:2001 (λ – value) 0.037 W / mk
Compressive Behaviour I.S. EN 826:1996 -Compressive
Stress at 10% relative deformation
12.11 kPa
Tensile strength Parallel to face I.S. EN 1608:1997 29.9 kPa
Tensile strength Perpendicular to face I.S. EN 1607:1997 21.9 kPa
Dimensional stability I.S. EN 1603: 1997
Method B
Length 0.24 %
Width 0.22 %
Dimensional stability I.S. EN 1604: 1997
With 48 hours at 60oC
Length 0.46 %
Width< 0.39 %
Depth 1.79 %
Dimensional stability I.S. EN 1605: 1997 Step A 75.20 %
Step B 86.40 %
Air Permeability I.S. EN 29053 NA
Density (Range) I.S. EN 1602 13.6-14.4 Kg/m3
Density for 125cm3 QA sample 1.7 – 1.8 g
Susceptibility to Mould growth IS EN ISO 846 Class 0